How to Knit on the Right Side

How to Knit on the Right Side

How to Knit on the Right Side

Summary

    – Step 1: Knit one stitch right side up

    – Step 2: Knit the next stitches

    – Avoid the most common mistakes

Knitting right side up is the most basic technique to advance your knitting. There are different ways to knit a stitch, right side up or upside down. It is called moss stitch when all rows are knitted in purl stitch. The knitting is called stockinette, alternating with every other row in purl stitch. Here is a clear explanation of how to knit the right side up.

1. Knit a purl stitch

After setting up the stitches, take the needle with the set-up stitches in your left hand. Place your ball on the right and take your second needle in your right hand.

    1. Stitch your right needle into the first stitch of your row, passing under the left needle, well between the two strands of the stitch.

    2. Take the yarn that goes to the ball and goes around the right needle, going from bottom to top and ending on the right side of the needle.

    3. Hold the yarn with the fingers of your right hand to create a slight tension.

    4. Pass the tip of the right needle through the stitch, keeping the thread taut on it.

    5. Remove the left needle by sliding it out of the stitch.

2. Knit the following stitches

How to Knit on the Right Side

    – Knit the remaining stitches in the same way.

    – When you reach the end of your row, all your stitches are on the right needle.

    – Change hands and start knitting again in a purl stitch to get a mossy stitch.

Note: to achieve a regular result, try to keep an even tension on your yarn.

Avoid the most common mistakes

How to Knit on the Right Side

Mistakes happen regularly during the first attempts. It is essential to understand and correct them. To find your way around, don’t hesitate to count your stitches periodically and compare them with the number of stitches you started with.

The size of the yarn

Be careful to use a thick enough yarn at the beginning. This will allow you to understand the pattern of the stitches better. Choose a thread suitable for 5-6 needles, a minimum comfort size for beginners. You can find this information on the ball’s label, more commonly known as the ring.

The position of the ball of yarn

Pay attention to the position of your yarn on the ball. If your string is in front of your work, you risk creating excess stitches, called overcasting, where the cord passes over the needle without being knitted. You have to go around your right needle after stitching in your left needle, so the yarn has to be on your right. The best position is always to keep the ball on your right. The yarn gets behind your knitting when you knit a purl stitch.

The thread has split

When you insert your needle into your stitch, ensure that you have picked up the whole stitch. The yarn may split slightly and you may be poking your needle into the yarn. This can cause extra stitches. In this case, remove the needle from the yarn and re-pick the inside of the stitch.

Catching a stitch

    – If you lose a stitch and realize it right away, slip it onto the left needle and knit it usually.

    – If you realize it at the end of your row:

        ◦ Secure it with a safety pin and knit until you get to the same spot.

        ◦ Slip it onto your left needle and knit it normally.

    – If you notice several rows later :

        ◦ Lay your knitting flat and remove your needles from the knitting.

        ◦ Unravel the few rows by gently pulling on your yarn.

        ◦ Once you get to the row where the stitch is located, unravel to the edge of the knit.

        ◦ Make sure the yarn going to the ball is on the right side of your work, and slip a needle from left to right through all the stitches.

        ◦ If the yarn is on the left, turn your knitting so that it is on the right.

Make sure the knitting is even

Keep an even tension on your yarn when making your stitches to achieve a consistent result. If, despite all this attention, the result seems irregular, even out the tension by pulling on your knitting in the width and length.

Sometimes a single stitch appears looser than the others. In this case, take a needle and pull on the yarn at each stitch of the same row to even out the whole. The goal is to reduce the visual effect by distributing the excess in the row.

Read more:

knit purl

Best Tips on How to Knit Purl

Best Tips on How to Knit Purl

Summary

Step 1: Knit a purl stitch

Step 2: Knit the next stitches purl

Tips for beginners on how to knit purl

To learn how to knit, you need to start with the basics. After knitting the stitches, learn how to knit the purl stitch, which is used to obtain a mossy stitch when the work is knitted right side up in each row on straight needles.

Then, we learn the purl stitch, which allows realizing the purl stitch when the work rows are knitted by alternating a row on the right side and a row on the left side. Purl stitch is achieved by knitting alternately a purl row and a purl row. Knowing these two stitches is necessary and will allow you to do many other more elaborate stitches, such as ribbing.

Here are the steps to follow to learn how to knit purl.

1. Knit a purl stitch

Knit the desired number of stitches, making sure not to overcrowd your stitches. It will be more challenging to knit purl if the work is too tight.

Hold your needle with your cast-on stitches in your left hand, holding the stitches with your fingers to avoid losing them. Hold the other needle in your right hand.

Then:

Stitch your right needle into the first stitch, from right to left. The right needle will be between the two strands and in front of the left needle. The yarn connected to the ball is in front of the work.

Take the yarn connected to the ball and wrap it around the right needle, passing it over and under the right needle. While holding the thread between your thumb and forefinger, tightly pull the thread back along the right needle.

Pass your right needle through the loop of the left needle stitch and bring the right needle under the left needle.

Drop the stitch from the left needle by pulling the needle back. This will create a purl stitch on the right needle.

2. Knit the following purl stitches

knit purl

Knit the next stitches, in the same way, repeating steps 1 to 4. Note that the yarn connected to the ball should always be in front of the work.

You will complete the first row once all the stitches on the left needle are knitted.

Turn the work over and pick up the needle from the knitted row in the left hand to knit the next row.

Note: Always finish your row before putting your work aside; this will prevent your stitches from expanding and making your knitting uneven.

Tips for beginners on how to knit purl

knit purl

There are a few things to keep in mind to get correct results faster when starting to knit. It is also advisable to practice several times to reach satisfactory work.

Use the suitable material to start knitting.

knit purl

When practicing purl knitting, use at least 4.5 or 5 mm needles, as you will have a better grip, and the knitted stitches will be more visible. Choose a yarn size that matches the size of your needles or is slightly thicker.

Prevent the right needle from falling off

To prevent the right needle from falling off while knitting your stitches, you can lock the right needle under your arm and hold it against you, so there is no risk of the needle falling off and less chance of losing your stitches.

Catch a lost stitch

If you lose a stitch, the stitch may unravel. You can catch it with an auxiliary needle or hook, preferably using a size smaller than your needle size. You will need to place the hook in the stitch loop and bring the horizontal thread corresponding to the lost stitch in the same direction as the other stitches in the row.

Keep your knitting even

knit purl

To achieve even work, practice knitting several rows the same way and keeping the same tension on the yarn connected to the ball when you knit your stitch purl. Hold the yarn connected to the ball over your right index finger and slide it under your ring finger for more consistency. The work will keep the same tension throughout the knitting.

Finding your way around your knitting

To knit a piece of work in stockinette, stitch right side up or the wrong side down, count your rows by writing them on a sheet of paper with a bar or a cross, or slip a row counter on the right needle. The row counter will need to be reinserted once the needle is changed. You will also need to count your stitches regularly at the end of a row to ensure that none are missing from your work. This way, you will not lose track of your work and know exactly where you are.

DIY

11 Best Strategies To Connect With The DIY Market

The DIY market is not a small segment of the population. Platforms such as Instagram and Pinterest, the DIY movement has experienced a renaissance. As people realize that DIY projects can be economically beneficial and fun, more people adopt them as a hobby.
What used to be limited to a small group of craftspeople has now exploded in popularity. Therefore, it is in the best interest of businesses to tap into this burgeoning market as soon as possible.
Here are eleven strategies most effective in establishing a connection with the DIY market.

Put DIY Users Front and Center

Putting DIY users at the forefront gives them more opportunities and leads to higher adoption/conversion. Instead of “selling”, use your service or product to educate and inform these users. Let them be your testers and advocates while showcasing their creativity and influence. Make them the focus and reap the rewards.

Tap Into Their Sense of Self-Sufficiency

Take advantage of DIYers’ sense of self-sufficiency. This crowd is motivated by thrift and creativity, but they’re also driven by the pride you feel when you’ve made something yourself. Provide content and tactics that acknowledge self-sufficiency and reward it with a pat on the back.

Educate, Educate, Educate

Educational content and instructional material should be a big part of any producer or distributor’s marketing strategy. Establish yourself as an authority on the products and services you represent through educational content.

Make Sure Your SEO Is On-Point

Social influencers can be of assistance, but anyone doing any kind of DIY is often looking for information. So, is your SEO in place? Does your content account for keywords that are relevant to your DIY brand? Is your content relevant, up-to-date and informative? Are you actively seeking out your best customers? Optimize before you dive into investing in influencers, or you may not get the full value for your money.

Leverage Social Media Influencers

This growth is also in line with another rise: social media influencers. Get in touch with some of the top DIY influencers in your field and propose a partner sponsorship – for a blog or social campaign, for example. Highlight their project in exchange for your company offering a key tool, system or service and then cross-market the result. Win-win!

Facilitate User-Generated Content

Facilitate user-generated content with practical advice on using your products and make sure your brand is visible in DIY communities on blogs, forums and Facebook. Collaborating with DIY influencers is also a valuable marketing tool to engage with DIY consumers.

Always Include Video Content

Pinterest
Pinterest

The Pinterest survey found that 67% of Pinners are influenced by service and product videos uploaded to the platform. For marketing campaigns targeting Pinterest DIY customers, brands should always include video content in their marketing campaigns. Since 97% of all searches on Pinterest are unbranded, you should use generic keywords when uploading your mobile-friendly video – focusing on matching searcher intent.

Prioritize Discoverability

The best way to target any niche audience is to understand which keywords or topics of conversation are most frequently used. Social listening can assist brands identify high-volume hashtags to use in their posts so they’re easy to find when influencers are looking for new ideas and inspiration.

Join Local DIY Groups on Social Media

Join any local DIY groups on social media and post videos and pictures of your work while commenting on other people’s posts. On Facebook, there are local DIY groups that offer an excellent opportunity to interact with local DIYers.

Inspire With a Roadmap

The growing DIY trend, especially among a younger audience, doesn’t just want to see cool potential projects and ideas; they want to see action. Providing people with easy-to-follow and clear steps on how they, too, can bring a product to life is the best way to capture this market. Keeping your content actionable is a must – the DIY market expects nothing less.

Use YouTube Instead

YouTube
YouTube

As an alternative to Pinterest, it is highly recommended to utilize YouTube’s platform to connect with the DIY audience. The comments section is an amazing opportunity to interatc and connect directly with people interested in DIY projects. Posting videos on YouTube is also a great way to help boost your company’s SEO, helping DIYers find you through organic searches.

Let us know in the comment section what your strategies are to connect with the DIY market.